Norma Kirkland Crimper August 09th, 2018 - 00:09:09
To use the coil crimping pliers, hold them so that the red dot on the top of the pliers faces away from your palm. Hold the bound document so that the coil that needs to be crimped is at the top. Insert the pliers so that the lower jaw is below the coil rung that you want to crimp and the top jaw is positioned above it. Squeeze the handles to cut the coil and continue to apply pressure until the pliers are completely closed in order to crimp it. Repeat the process on the other end of the coil to finish the bind.
I don't know about you, but after 25 years of cable installations, it certainly seemed as if my tool bag was filled with more styles of crimping tools than any other type of electronics tool. There are just so many different types of crimp connectors to deal with, that one crimper just didn't fit all of my installation needs.
Modular plugs, "F" connectors, "N" connectors, RG58, RG59, RG6, Insulated Terminals, Uninsulated Terminals are just a few of the connector types I run into almost every day in my electronics shop, and every time I thought I had it covered, another new style of connector came along forcing me to purchase another crimping tool.
The main problem that commonly occurs when people begin buying their own tools, such as wire crimpers, is that those types tools comes in a variety of sizes for different jobs. The same issue happens when you buy a set of metric measurement ratchets or wrenches, but the task requires a set of standard measurement tools. This is made worse when looking at wire crimpers because they not only come in different sizes, but there are also a variety of types that can help or hinder a project. The most basic wire crimpers are used for simply cutting and stripping wires. There are also more specialized types of crimpers which are used for different applications, such as crimping together different sizes and types of data or cable couplers. Data and coaxial cables typically become vastly more complex since they often contain several layers of wires, some of which need to be stripped back, and others that need to be crimped. For this reason, is is very important to know what to look for when selecting the right pair of wire crimpers.
Most people who like do it yourself (diy) projects often run into situations where they need to run wire. This job can quickly become very difficult or cumbersome without the proper tools such as a wire crimper or a pair of wire strippers, and more importantly, the correct type of crimper for the job. Crimpers come in many different varieties and sizes and the right tool for the job often depends on the type of wire that needs crimped and/or stripped. For example, if you were to attempt to use a RJ-45 data wire crimper to crimp the end of a coaxial cable, you would likely bend the teeth of the RJ-45 crimper. Some people also believe it is perfectly fine to use the stripping blade on any set wire crimpers for any type of wire, regardless of how heavy the gauge. A heavier gauge wire always needs a heavier gauge to get the job done right! Although the crimper may not be visibly damaged the first time it is used to cut a heavier than intended gauge wire, in most cases it will weaken the blade, which will cause it to crack and chip over time.
Leave Your Reply on Gutter End Cap Crimper Malco Gutter End Cap Crimper Gutter End Cap Crimp Tool Aluminum Gutter End Cap Crimping Tool Gutter End Cap Crimper Harbor Freight