Tamera Osborne Crimper August 30th, 2018 - 03:17:55
To use the coil crimping pliers, hold them so that the red dot on the top of the pliers faces away from your palm. Hold the bound document so that the coil that needs to be crimped is at the top. Insert the pliers so that the lower jaw is below the coil rung that you want to crimp and the top jaw is positioned above it. Squeeze the handles to cut the coil and continue to apply pressure until the pliers are completely closed in order to crimp it. Repeat the process on the other end of the coil to finish the bind.
Most people who like do it yourself (diy) projects often run into situations where they need to run wire. This job can quickly become very difficult or cumbersome without the proper tools such as a wire crimper or a pair of wire strippers, and more importantly, the correct type of crimper for the job. Crimpers come in many different varieties and sizes and the right tool for the job often depends on the type of wire that needs crimped and/or stripped. For example, if you were to attempt to use a RJ-45 data wire crimper to crimp the end of a coaxial cable, you would likely bend the teeth of the RJ-45 crimper. Some people also believe it is perfectly fine to use the stripping blade on any set wire crimpers for any type of wire, regardless of how heavy the gauge. A heavier gauge wire always needs a heavier gauge to get the job done right! Although the crimper may not be visibly damaged the first time it is used to cut a heavier than intended gauge wire, in most cases it will weaken the blade, which will cause it to crack and chip over time.
RJ45, "F" connectors, "N" connectors, BNC, TNC, all have one thing in common, they all require special crimping tools to install them.
When binding with spiral coils, the ends need to be crimped in order to secure the document and prevent the coil from twisting out of the holes. The most common way to cut and crimp the ends of plastic binding coils is by using a pair of specially designed hand-held pliers. Coil crimping and cutting pliers perform two distinct actions - they cut the coil so that it fits the document that is being bound and they crimp the end of the coil so that it stays in place.
There are basic questions to start off asking before selecting a pair of wire crimpers for a project. Firstly, and most importantly, the type of wire or cable to be crimped will largely dictate what style of crimpers to select. Secondly, the thickness, or gauge, of the wire will determine if a heavy duty pair is needed or a light-weight pair will do the job. When selecting a heavy duty pair of wire crimpers, it is critical to make sure that both the crimping mechanism and the blade for cutting the wire are of high quality to prevent them from chipping. Some tools offer a mechanism for easily changing out parts as they get chip or get dull, which is important to look for because it is always nice when they last for more than one job.
Have Something to Say on Wire Stripper Crimper Crimp Wire Stripper American Wire Gauge Klein Tools Pliers Crimping
Posts Related To Wire Stripper Crimper